Fab Tec feeder Screen Rip Rap Plant

Fab Tec Heavy Duty Aggregate Prep Plant For Large Rock

TANDEM AXLE CARRIER, 18″ WF 50 LBS BEAMS:

1. Hutch 9700 equalizing suspension.
2. 11:00Rx22.5 Tires, ten hole piloted hub wheels.
3. Standard forge 22,500 axles, air brakes, lights and mud flaps.
4. Six ground support stands with jacking legs.

4×14 2 DECK FAB TEC INCLINE SCREEN:

1. 20 HP TEFC motor with pivot motor base and power and belt.
2. 3/8″ Plate side walls.
3. Huck bolted screen decks, constructed of 4″ x 3″ x 3/8″ angle iron and 4″ x 2″ rectangular tubing, 2″ x 3″ flat bar crown bars.
4. AR lined discharge lips.
5. AR lined feed box.
6. Alco high temper isolation springs.
7. 100 MM Torrington spherical bearings designed for shaker screens.
8. Center support tube 9″ with ½” wall and 2″ thick flanges.
9. FAB TEC cartilage style bearing housings, with heavy duty 1 ¼” wall.
10. Eccentrics with add on weights.
11. 10″ WF sub frame 33# with 8″ channel 13.75# cross members.

42″x17′ PRO VIBRATING GRIZZLY FEEDER:

1. 1/2″ Side walls with 1/2″ AR bolt-in-liners.
2. 8″ WF cross members on 18″ centers.
3. Solid steel machined bearing housings.
4. 90 MM Torrington YM spherical bearings.
5. 4140 2″x12″ drive gears on 4150 Stress proof shafts.
6. Flow through lubrication, ensuring smooth running and heat dissipation.
7. Alco heat treated springs.
8. All bolts are oversized grade #8 with L9 washers and self locking nuts.
9. T1 adjustable grizzly bars with option of FAB TEC’S non plug grizzly plate.
10. 25 HP 1800 RPM TEFC Teco motor.

8’x19′ ¾” PLATE FEED HOPPER.

12″ WF SUPPORT FRAME FOR HOPPER.

HEAVY AR LINED OVER SIZE CHUTE.

AR LINED GRIZZLY BY PASS CHUTE.

AR LINED PRODUCT CHUTES FOR 1st AND 2nd DECK PRODUCTS

36″x42′ FEED CONVEYOR, 15 HP TEFC:

1. SEW Euro drive right angle gear reducer.
2. Vulcanized lagged head pulley, self cleaning wing tail pulley.
3. 3 Ply belt ¼” cover, Dodge SCM bearings and Alloy shafts.
4. Impact idlers in feed area.
5. Full length formed skirt board.

1/4” PLATE UNDER SCREEN HOPPER WITH WEAR STRIPS & ADJUSTABLE WIPERS.

WALKWAYS WITH HANDRAILS BOTH SIDES AND BACK OF SCREEN.

48″ UNDER SCREEN CONVEYOR 10 HP TEFC:

1. Falk 5203 shaft mount reducer.
2. Vulcanized lagged head pulley & self cleaning wing tail pulley.
3. Cema C4 sealed idlers, 2 ply 3/16 cover belt.
4. Routered belt clips.

SAFETY GUARDS, SANDBLASTED CHASSIS, RUST INHIBITOR PRIMER, AND TWO FINISH COATS INCLUDED.

POWER PLANT & (ABB) SWITCH GEAR FOR SELF CONTAINED UNIT:

1. Perkins gen set, diesel tank with filter, heavy duty air cleaner
2. Switch gear in NEMA 12 enclosure, start & stop buttons on door, fire up warning horn system,
3. (3) 10 hp outside extra starters
4. Walkway with ladder and safety handrails for maintenance.

75 KW Deutz Power Unit

SWITCH GEAR ONLY WITH THE FOLLOWING STARTERS (ABB OR SQUARE ‘D’):

1- 20 HP FOR SCREEN
1- 25 HP FOR VGF
1- 7 1/2 HP FOR UNDER SCREEN
1- 15 HP FOR FEED CONVEYOR
1- 10 HP FOR HYDRAULIC PUMP
3- 10 HP FOR OUTSIDE CONVEYORS

HYDRAULIC DUMP GRIZZLY WITH PENDANT REMOTE CONTROL:

1. Heavy support frame assembly.
2. 2½”Ø Round stock & 1″X7″ flat bar formed grizzly bars.
3. 10 HP electric over hydraulic power package.

If radio remote is to be supplied by customer, co-ordination with Fab Tec electrician will be necessary.

30 HP BENSHAW AC VARIABLE FREQ CONTROLLER FOR VGF

HEAVY DUTY, REVERSIBLE 30″x 10′ CROSS CONVEYOR, 5 HP TEFC:

1. 24″ spacing on CEMA C5 channel inset idlers.
2. Dodge SCM bearings on 2 3/16” alloy shafts.
3. 3 ply, 3/16″ cover belt.