As New 2011 Elrus 4248 HD Feeder
One (1) Only 2011 ELRUS 42” – 48” Heavy Duty Belt Feeder – As New
Chassis
- 18″ w.f. main frame
- Fifth wheel pin assembly under hopper
- Eight (8) 11 x 22.5 radial tires
- ELRUS HD HSS tandem walking beam suspension
- Air brakes, running lights, and mud flaps
- Pick up hitch
- Four blocking legs
- Drive and belt guarding
- Return roller guards provided on rollers accessible from normal working surfaces
- Light stands on both ends of plant – 2 – 400w metal halide flood lights mounted on feeder, facing hopper & discharge conveyor
Hopper
- 3/8″ plate hopper with bulkheads on both sides
- 16′ x 8′ hopper top opening – 20 cu. yds
- Self relieving bottom opening
- A/R plate hopper liner
- ¼” x 5’ x 16’ (x2)
- ¼” x 4’ x 8’ (x1)
Hydraulic Side Dumping Grizzly
- Tri-bar adjustable grizzly bars with 2” adjustments set @ approx. 9”
- Hydraulic grizzly dump with 4″ diameter Heavy Duty cylinders
- Remote controlled from tower
- 15 HP C-flange motor, 18 gpm pump and Yuken controller
- Grizzly hinges complete with pins and bushings are case hardened
| Steering | 4,945 kg | 10,900 lbs |
| Drive | 20,000 kg | 44,000 lbs |
| Tandem | 12,970 kg | 28,534 lbs |
| Total | 32,248 kg | 71,090 lbs |
Feed Belt
- 42″ x 20′ removable belt feeder cartridge
- 18″ rubber lagged head pulley c/w 3 7/16″ Dodge S2000 double spherical roller bearings
- 14″ self cleaning tail pulley c/w 2 15/16″ NTN UCPX Ultra-Class ball bearings
- Full tail pulley guard
- Enclosed take ups
- 25 impact roller assemblies mounted on 2 3/8” shafts with pillow block bearings @ 8 ¼” centres c/w 21 – 6” rubber discs per shaft.
- 42″ wide 3 ply-600 1/4″ Goodyear Plylon Plus conveyor belting with vulcanised splice
- 15 hp Torspec variable speed drive c/w remote speed control
- Eurodrive gear reducer 105:1 reduction
- Final #140 chain drive to head pulley
- Belt scraper
48″ x 46’ Adjustable Discharge Conveyor
- 24″ deep lattice frame conveyor
- 16″ rubber lagged head pulley c/w 3 7/16″ shaft & Dodge S2000 bearings
- 14″ self cleaning tail pulley c/w 2 15/16″ NTN UCPX Ultra-Class ball bearings& full guard
- Enclosed take ups
- Browning 307 reducer
- 25 H.P. T.E.F.C. 1800 RPM electric motor
- 48″ 3 ply 3/16 x 1/16 Goodyear Plylon belt with vulcanised splice
- 5″ self cleaning return rollers
- 35 deg. – 5” Troughing assemblies @ 24” centres
- 4 – 20 deg. impact troughing assemblies at transfer point
- 5′ receiving hopper with flashing
- 5″ spill boards installed full length of conveyor
- Dust hood @ discharge end c/w soft rubber dust chute to customer belt, approx.10ft