THE PRO SCREEN:
MAIN FRAME:
- 30″ Deep truss, top and bottom rails 2″x4″x3/16″ rectangular tube, 2″x2″x3/16″ square wall diagonal braces.
- Under carriage support struts 4″x4″x1/4″ tube steel.
- 22,500 lbs. axle w/ 11:00×22.5 dual tires, ten hole Budd wheels, and air brakes.
SIX CUBIC YARD FEED HOPPER, 1/4″ PLATE, ADJUSTABLE WEIGHTED FEED GATE.
14′ WIDE SEPARATING GRID TYPE GRIZZLY (EVERY OTHER GRIZZLY BAR IS JOINED AND HINGED TO LIFT TOGETHER FOR CLEANING).
24″x5′ BELT FEEDER:
- Dodge SCM bearings, 3 ply belt with 1/4″.
- Vulcanized lagged head pulley and self cleaning wing tail pulley.
- 12″ Centers on Cema C sealed carrier rollers.
- Side and rear swing out doors for maintenance and inspection of belt feeder.
SIDE AND REAR SWING OUT DOORS FOR MAINTENANCE AND INSPECTION OF BELT FEEDER.
MAIN FEED CONVEYOR 30″x47′:
- 74318DCB CESSNA motor.
- Falk 14 to 1 ratio 4203 reducer.
- Dodge SCM bearings and 2 ply belt 3/16″ cover.
- Close setting on Cema B sealed idlers in feed area, then 48″ spacing.
- Vulcanized lagged head pulley, self cleaning wing tail pulley.
DEUTZ F4L2011 AIR COOLED DEUTZ DIESEL 55 HP AT 2100 RPM FULL YEAR WARRANTY:
- 12 Volt electric starting system, safety shut down system.
- 45 gallon diesel tank.
4’x8′ 2 DECK PRO INCLINE SCREEN:
- 80 MM Torrington spherical bearings.
- Steel machined bearing housings.
- Screen suspended on 116 Firestone air bags.
- Adjustable discharge chutes.
- Removable 2nd deck with option of harp wire type deck for fine screening.
HYDRAULIC SYSTEM & COMPONENTS:
- Metaris two stage hydraulic pump.
- Individual spool valves for conveyor and screen:
- Additional spool valve for outside conveyors.
- Power raise and lower with dual cross
- Power adjust on incline of screen with dual cross
- Weather head fittings and 1″ r2 weather head hydraulic hose.
- 70 gallon hydraulic tank with filter system.
PLANT IS TOTALLY SELF CONTAINED WITH ADEQUATE POWER AND HYDRAULICS TO RUN PLANT AND TWO OUTSIDE ( not included ) 30″X50′ CONVEYORS
