Used 2024 Fab Tec Portable Wash Plant

Portable Fab Tec 5′ x 16′ – 3 Deck Wash Plan with 36″ x 25′ Sandscrew:

Pro 5′ x 16′ – 3 Deck Incline Screen:

20 HP TEFC with pivot motor base and power and belt.
3/8″ PL side walls.
Huck bolted screen decks, constructed of 4″ x 3″ x 3/8″ angle iron and 3″ x 2″ rectangular tubing, ½” x 3″ FB crown bars.
AR lined discharge lips.
AR lined feed box.
Alco high temper isolation springs.
100 MM Torrington spherical bearings designed for shaker screens.
Center support tube 9″ with ½” wall and 2″ thick flanges.
FAB TEC cartilage style bearing housings, with heavy duty 1 1/4″ wall.
Eccentrics with add on weights.
10″ WF sub frame 33# with C8″ x 13.75# cross members.
Standard side tension formed clamp bars and ½” crown bar rubbers.

Aggretek 36″ x 25′ Sandscrew:

15 HP Motor.
Oil lubricated heavy-duty gearbox.
Replaceable wear plates.
100 TPH MAX. CAPACITY material size 3/8″.

(10) Spray Bar Wash System:

50/50 Brass “Vee Jet” nozzles, 1½” spray bars.
Brass individual gate valves for each spray bars.
Water manifold with inlet pipe and flange.
Text Box: 516-3 Wash PlantRated at 640 GPM at 40 psi.

18″ WALKWAYS BOTH SIDES OF SCREEN, BACK 48″ PLATFORM, SKYWALK FLOOR, TOE BOARDS, 42″ TUBE STEEL HANDRAILS, AND ACCESS LADDER.

(3) AR LINED DISCHARGE CHUTES WITH EASY ACCESS TO PRODUCT CONVEYOR:

Optional blending capabilities offered.

TANDEM AXLE CARRIER 16″ WF BEAMS:

Hutch 9700 series suspension.
22,500# Standard forge axles.
11:00×22.5 Tires, ten hole piloted hub wheels.
Air brakes, LED brake lights, LED marker lights, reflector tape, and mud flaps.

SELF CLOSING SAFETY GATE AT LADDER OPENING.

SAFETY GUARDS, SANDBLASTED CHASSIS, RUST INHIBITOR PRIMER, AND TWO FINISH COATS OF PAINT INCLUDED.

100 FT POWER CORD PACAKAGE WITH CORD ENDS NO ELECTRICAL CONTROLS

PRODUCT CHUTE BLENDING ON 1ST TO 2ND AND 2ND TO 3RD

FEED SLURRY BOX WITH SPRAY HEADS:

HYDRAULIC RAISE AND LOWER OF SCREEN AND SLURRY BOX:

12 Volt system.

BINKLEY (2) LANDING GEAR JACKS:

PLUMBING AND FITTINGS FOR “RISING CURRENT” INTO SANDSCREW:

Weight Axel 26,340 lbs. Pin 13,600 lbs. Total 39,600 lbs.
Travel height 15 ft. 4’’
Travel length 39 ft.
Travel width 10 ft. 11 ft.
Operating height 20 ft. 6’’ to top of slurry feed box

Back to Equipment